MH-X30D 手持电动旋盖机-上海麦行机械有限公司

MH-X30D 手持电动旋盖机

产品介绍

手持旋盖机主要用途：

主要用于各种瓶盖的旋紧和旋松。

手持旋盖机主要范围：

水，饮料，药品，酒，日化，化工等瓶子的拧盖。
手持旋盖机特点：

1、手持式电动旋盖机便于随身携带，能方便地用于拧紧或旋松各种瓶盖，其可调的离合器能方便有效地避免瓶盖的损坏，并减少内塞的磨损。

2、一旦瓶盖旋紧，卡头即自动的停止旋转，表明您可进行下一个旋盖作业，能有效减少劳动强度，保证旋盖质量。

3、本机使用方便，锁口质量好，能连续工作，整机包括：主机，铝制旋盖卡头及缓冲内塞。

4、本机可单独使用也可跟灌装机配套使用，适合大批量食品，医药，农药，化工及日化等行业批量生产的理想设备，5、本机它具有拧盖范围宽，拧盖不受瓶子高矮，形状大小，重量的限制，即可旋盖又可拧开盖，操作方便，故障率低价格低廉等特点，是螺纹旋盖拧紧的最佳利器。

手持旋盖机技术参数:

1.旋盖速度约25瓶/分钟

2.主机净重 0.6kg/1.1kg

3. 电压 220V 50/60Hz

4.离合器扭矩可调

5、旋盖范围 10-50mm

6、注意 10-20mm、20-30mm、30-40mm、40-50mm （四个内芯）随机器标配

7、电源尺寸 125×80×60mm

8、主机 60×60×300mm

Model: MH - x30d

Main use of hand-held capping machine:

It is mainly used for tightening and loosening various bottle caps.

Main scope of hand-held capping machine:

A screw cap for bottles of water, drink, medicine, wine, daily chemical, etc.

Characteristics of hand-held capping machine:

1. the hand-held pneumatic capping machine is convenient to carry, can be conveniently used for tightening or loosening various bottle caps, and the adjustable clutch can conveniently and effectively avoid the damage of the bottle caps and reduce the abrasion of the inner plugs.

2. once the bottle cap is tightened, the chuck automatically stops rotating, indicating that you can perform the next capping operation, which can effectively reduce the labor intensity and ensure the quality of the capping.

3. the machine is convenient to use, has good locking quality and can work continuously. the whole machine includes: main machine, aluminum screw cap chuck and buffer inner plug.

4, the machine can be used alone or with filling machine, suitable for mass production of food, medicine, pesticides, chemical and daily chemical industry ideal equipment,

5, the machine has a wide range of screw cap, screw cap is not limited by the height of the bottle, shape size, weight, can screw cap and unscrewed the cap, convenient operation, low failure rate, low price and other characteristics, is the best tool screw cap tightening. Technical parameters of hand-held capping machine: 1.screw cap speed approx. 25 bottles / min

2.net weight of host is 0.6kg / 1.1kg.

3. voltage 220 v 50 / 60 Hz

4.the clutch torque can be adjusted

5. cover range 10 - 50 mm

6. pay attention to 10 - 20 mm, 20 - 30 mm, 30 - 40 mm, 40 - 50 mm ( four cores ) random machine standard

7. power supply size 125 x 80 x 60 mm

8.host 60 x 60 x 300 mm

更多产品